Introduction to Armstrong Woodworks
Armstrong Woodworks is a leading manufacturer of grilles, registers and diffusers for heating, ventilation and air conditioning applications. Since 1955, Armstrong Woodworks have prided themselves in providing architects, engineers and contractors high-quality grilles that not only meet Air Diffusion Council standards but also stylishly fit into any space.
The company carries a wide range of materials including cast iron, aluminum, steel and even brass depending on the requirements and specific application of the project they are working on. Their product line includes ceiling or panel mounted grilles, lay-in ceilings, double deflection grilles as well as linear bar grilles with many decorative profiles available to choose from.
Not only do Armstrong Woodworks take pride in manufacturing quality products that are designed to last for years but also have put special attention to ensure their clients know about the safety standards associated with their products. All Armstrong Duct Systems have been certified by Underwriters Laboratories (UL) to ensure highest standards for installation, operation and maintenance. Furthermore, their products all come with installation instructions that provide complete information on proper sealing techniques and proper care of the product post installation. Above all else Armstrong Woodworks offer exceptional customer service both before and after the sale as they are very proud of the products they manufacture.
Types of Grille Installation
The primary types of grille installations are aluminum, steel, and plastic.
Aluminum is a strong, lightweight material suited to the outdoors. It can withstand harsh weather conditions such as rain and snow with minimal maintenance required. Aluminum grilles provide excellent airflow and resist corrosion that can occur over time due to its non-porous nature. It also has an aesthetically pleasing finish, which makes it a popular choice for grilles. The major disadvantage of aluminum as a grille installation material is that it can dent or scratch easily if not given adequate protection when being handled.
Steel is more suitable for less exposed locations since it rusts if exposed to water or high humidity levels. Steel grilles are very strong and easy to install compared to other materials but often require more maintenance since rusting needs to be prevented through regular care and repainting if necessary. With regards to aesthetics, steel does provide a contemporary look but can sometimes appear industrial in comparison to other materials like aluminum or plastic.
Finally, plastic is becoming an increasingly popular choice for grilles due to its versatility and affordability when compared to metal materials such as steel or aluminum. Unlike metal which can corrode over time due to exposure, plastic does not require special care for long-term use or special coatings like paint for cosmetic appeal. Additionally, it’s easy to customize with different shapes and patterns; this opens up more creative applications in design compared with metal materials. However, one downside of plastic is that some types are vulnerable to extreme heat while others are more susceptible than metal materials when exposed forcefully during storms or tornadoes.
Expert Tips for Installation
Benefits of hiring an experienced technician for your grille installation:
• An experienced technician will have the specific knowledge and expertise necessary to install your new grille properly. They will understand exactly how to properly measure, cut, and fit it into the space. They will also be familiar with any local requirements that may apply, such as obtaining permits. They’ll likely have dealt with similar scenarios previously, meaning they can anticipate problems or challenges to avoid any delays.
Safety Precautions:
• Always wear protective glasses when performing grille installations. A slip of a saw or other tool could result in hardware flying into your eyes if you’re not protected. Additionally, be sure to wear gloves and any other safety equipment as necessary for handling tools during the installation process.
• Make sure to double check all measurements prior to cutting anything to ensure it fits perfectly in its intended space. Don’t rush this process as one mistake could turn a two-hour installation into all day affair. Additionally, take special care when working near finished surfaces like walls or cabinets as the potential exists for marring them when working with tools in close proximity.
Time Saving Tricks:
• Prior to beginning your grille installation process determine whether you need additional supplies or materials such as shims. Having these ready ahead of time can save you valuable time throughout the actual installation process itself. Additionally try pre-assembling larger parts before attempting installation if at all possible as this too can save you some headache down the road.
• Utilize power tools whenever possible to get tasks completed more quickly but never forget about basic hand tools like sandpaper which often come in handy near the end of projects so finishing touches look perfect before calling it done!
How to Prepare for Installation
Before attempting your grille installation, it is important to make sure that your walls are properly prepared. Before you begin installation, you should measure the area where you plan to place the grille and use a pencil or erasable marker to trace the approximate outline of the frame on the wall. You should then check for any obstructions, such as wires or pipes in the wall, and take steps to revise your plans accordingly. When selecting a size for your grille, consider factors such as how visitors would enter and exit rooms in your home and if furniture may cause blocks or interruptions in airflow near the installed grille. Taking accurate measurements is essential when installing a grille. First, measure the rough opening size prior to ordering a grille so that it fits correctly. Then, you should measure each side of the existing frame to ensure that all four sides of the opening are identical before framing out any new openings with wood strips or drywall furring channels. Finally, use shims to ensure a proper fit and create airtight seals around all four sides of your frame for optimum performance of your Armstrong Woodworks grille.
Step-by-Step Instructions for Installing a Grille
Step 1: Before installation, make sure to measure the width, height, and depth of the grille frame. It is important to ensure proper fitment and that the grille can be secured properly.
Step 2: Determine a suitable location to mount the grille. It should be mounted in a place that cannot be seen externally when the vehicle is in motion and does not block any necessary vision or airflow.
Step 3: The appropriate mounting hardware for your specific grille should come with instructions on how to install it on your vehicle. Use these instructions and use clear silicone adhesive (for plastic frames) or an epoxy sealant (for metal frames) to affix the mounting hardware in place. Make sure all components are securely fastened before proceeding.
Step 4: Place the frame into its desired position on your vehicle, ensuring it is well-aligned with the body of your car and securely fastened in place with screws or other mounting apparatus.
Step 5: Install any accessories such as light fixtures, fog lights or spotlights onto your newly installed grille according to their own manufacturers’ instructions and using their specified materials and tools. These should typically include a screwdriver, nuts and bolts, washers, electrical tape, wire cutters/strippers, etc., depending upon what type of accessory you are installing.
Step 6: Check for any loose wires or gaps in insulation which could cause a short circuit or other safety issues before testing out your new headlights/fog lights/spotlights/etc., and enjoy your new Armstrong Woodworks Grille!
Conclusion
At Armstrong Woodworks, we want to ensure that you get the most out of your grille installation. We understand that the quality of any project is determined by all the components, from building materials to the skilled technicians who take on an installation job. Our aim is to provide you with a grille installation that meets your expectations of both form and function.
Our professional team of qualified technicians have years of experience with grille installations, so they know exactly what type of preparation is needed in order to have a successful installation. They have the necessary equipment and expertise to guarantee a seamless integration process. In addition, they are knowledgeable about national guidelines, which ensures that any component installed complies with health, safety and structural requirements.
No matter how complicated or difficult an installation may be, employing our qualified team can help make sure it runs smoothly and efficiently for a successful completion. With our team on board, your new grille will look great and last for many years to come without fail. Furthermore, you’ll also appreciate improved energy efficiency and heightened aesthetics within your home due to the added insulation provided by a properly installed grille system.
At Armstrong Woodworks, we understand how important it is for customers to feel satisfied with their new product; therefore we strive for excellence in every step – from measurements and planning through preparation and execution – towards installing your beautifully crafted woodwork grilles in your home or office so as to achieve an outstanding result every time!
Hi everyone! I’m a woodworker and blogger, and this is my woodworking blog. In my blog, I share tips and tricks for woodworkers of all skill levels, as well as project ideas that you can try yourself.
