is a small business that creates custom woodworking pieces for clients all over the country. We take pride in our work and strive to create pieces that are both beautiful and functional. We work with a variety of woods, and can create pieces in a variety of styles. We are also happy to work with clients to create pieces that fit their specific needs.
How To Use Ash For Woodworking
Woodworkers use ash for a variety of reasons. The wood is strong, yet lightweight, and it has a nice grain that can be accentuated with a finish. Ash also works well with both hand and power tools.
When working with ash, it is important to keep in mind that the wood can easily split. Make sure to use a sharp blade and to keep your cuts close to the wood’s natural lines.
Ash is a hardwood, so it can be difficult to drill through. When drilling, use a sharp bit and keep a steady hand.
Ash can be finished in a variety of ways. A clear finish will showcase the wood’s natural beauty, while a stained finish can give it a different look. Be sure to test any finishes on a small piece of wood before applying them to the entire project.
Ash is a great choice for a variety of woodworking projects. With its strong, lightweight, and beautiful grain, it is a popular choice for furniture, cabinets, and other projects.
Kostyo Woodworking
is a professional carpentry and woodworking company that specializes in a wide range of services, from small repairs and installations to complete home renovations. We take pride in our high level of customer service, quality craftsmanship, and competitive prices.
We understand that not everyone is familiar with the terminology used in the carpentry and woodworking industry, so we’ve created a glossary of some of the most common terms to help you better understand what we do.
Angle iron: A metal bar with a 90-degree angle bent into it, used to reinforce joints or to act as a mounting point.
Apron: The front part of a cabinet or other piece of furniture that sits on the floor.
Biscuit joiner: A power tool used to join two pieces of wood together by cutting a small slot in each and then inserting a biscuit (a small, oval-shaped piece of wood) into the slots. The biscuit is then glued to the two pieces of wood, which creates a very strong joint.
Blind dovetail: A type of dovetail joint that is hidden from view because the end of the board is cut at an angle.
Board foot: A unit of measurement used to calculate the price of lumber, equal to one square foot of board that is one inch thick.
Butt joint: A type of joint where two pieces of wood are joined together by simply butting them up against each other. This is the weakest type of joint and is not recommended for use in carpentry or woodworking.
Cabinetmaker: A carpenter who specializes in the making of cabinets and other furniture pieces.
Carcass: The structure of a piece of furniture, made up of the frame, panels, and other pieces of wood.
Caster: A small wheel that is attached to the bottom of a piece of furniture, used to make it easier to move.
Chamfer: A beveled edge, typically used on the corners of a piece of wood.
Clamp: A device used to hold pieces of wood together while they are being glued or screwed.
Construction adhesive: A type of adhesive that is used to bond two pieces of wood together. It is especially effective in bonding wood to metal or plastic.
Coping saw: A type of saw that is used to cut intricate shapes in to wood.
Crosscut: The cut of a piece of wood that is perpendicular to the grain.
Dadoes: A groove that is cut into the surface of a piece of wood, typically used to join two pieces of wood together.
Dado blade: A type of blade that is specifically designed for cutting dadoes.
Dovetail joint: A type of joint that is used to join two pieces of wood together, typically at a corner. The dovetail joint is one of the strongest types of joints and is very popular in carpentry and woodworking.
Dowel: A cylindrical piece of wood that is used to join two pieces of wood together.
Edge banding: A strip of wood that is glued to the edge of a piece of wood, used to cover up the end grain and give the piece a finished look.
End grain: The grain of a piece of wood that is perpendicular to the length of the board.
Face frame: The frame that is visible on the front of a cabinet or other piece of furniture.
Frame saw: A type of saw that is used to cut large pieces of wood into smaller pieces.
Grain: The direction of the fibers in a piece of wood.
Half-lap joint: A type of joint that is used to join two pieces of wood together, where one piece is cut in half and then glued to the other piece.
Hinge: A device that is used to attach a door to a cabinet or other piece of furniture.
Joinery: The technique of joining two pieces of wood together using a joint.
Laminate: A type of material that is used to cover the surface of a piece of wood. It is commonly used in the furniture industry because it is very durable and easy to clean.
Miter joint: A type of joint where two pieces of wood are joined together at a corner, using a miter saw to cut the joints.
Miter saw: A power tool that is used to cut miter joints.
Panel: A large piece of wood that is used to create the surface of a piece of furniture.
Plywood: A type of wood that is made up of several layers of thin wood veneers that are glued together.
Rail: The horizontal pieces of wood that run along the top and bottom of a cabinet or other piece of furniture.
Rip cut: The cut of a piece of wood that is parallel to the grain.
Router: A power tool that is used to create grooves and other decorative features in wood.
Skirting: The trim that is used to cover the bottom of a cabinet or other piece of furniture.
Stiles: The vertical pieces of wood that run along the sides of a cabinet or other piece of furniture.
T-bar clamp: A type of clamp that is used to clamp two pieces of wood together. It has a T-shaped bar that is used to apply pressure to the wood.
Thin-set mortar: A type of mortar that is used to attach tiles to a surface.
Titebond: A brand of wood glue that is popular in the carpentry and woodworking industry.
Veneer: A thin layer of wood that is used to cover the surface of a piece of wood.
Antique Woodworking Bench
An antique woodworking bench is a valuable tool for any woodworker. It provides a flat, sturdy surface on which to work, and it can also be used as a vise. Antique woodworking benches can be expensive, but they are worth the investment for the serious woodworker.
An antique woodworking bench is typically made from hardwoods such as oak or maple. It has a wide top with a flat surface, and it may have a number of different tools attached to it, such as a vise, a screwdriver, or a hammer. It is important to find an antique woodworking bench that is in good condition, as a bench that is in poor condition may not be safe to use.
Before buying an antique woodworking bench, it is important to inspect it to make sure that it is in good condition. The top should be flat and free of major dents or scratches. The tools should be in good condition, and the bench should be sturdy enough to support the weight of the woodworker.
An antique woodworking bench is a valuable tool for any woodworker. It provides a flat, sturdy surface on which to work, and it can also be used as a vise. Antique woodworking benches can be expensive, but they are worth the investment for the serious woodworker.
An antique woodworking bench is typically made from hardwoods such as oak or maple. It has a wide top with a flat surface, and it may have a number of different tools attached to it, such as a vise, a screwdriver, or a hammer. It is important to find an antique woodworking bench that is in good condition, as a bench that is in poor condition may not be safe to use.
Before buying an antique woodworking bench, it is important to inspect it to make sure that it is in good condition. The top should be flat and free of major dents or scratches. The tools should be in good condition, and the bench should be sturdy enough to support the weight of the woodworker.
What Does A Shaper Do In Woodworking
?
A shaper is a woodworking machine that is used to create decorative profiles on the edges of wood pieces. The shaper cuts the wood with a rotating cutter head that has a number of cutting blades. The profile that is created can be either straight or curved, depending on the shape of the cutter head.
The shaper is a versatile machine that can be used to create a variety of different profiles, including moldings, trim, and cabinetry. It can also be used to create detailed woodworking joints, such as mortises and tenons.
The shaper is a powerful machine and can quickly cut through a piece of wood. For this reason, it is often used to create the final profile on a piece of wood, after it has been roughed out with a smaller machine, such as a router.
The shaper is a popular machine among woodworkers because it is a versatile and powerful tool that can be used to create a wide variety of decorative profiles.
Hi everyone! I’m a woodworker and blogger, and this is my woodworking blog. In my blog, I share tips and tricks for woodworkers of all skill levels, as well as project ideas that you can try yourself.
