Woodworking Plans Cd Rack
If you are like me, you have a lot of CDs. And if you are like me, you don’t want them just lying around taking up space. You want them to be organized and accessible. But you don’t want to spend a fortune on an expensive CD storage unit.
Well, have I got the solution for you! Build your own CD rack! Not only is it cheap, it’s also easy to build.
The rack I built is made from 3/4″ plywood and can hold up to 120 CDs. It’s 24″ wide, 12″ high, and 10″ deep.
To build the rack, you’ll need the following tools and materials:
Tools
• Tape measure
• Circular saw
• Drill
• Jigsaw
• Hammer
• Nail gun
Materials
• 3/4″ plywood
• 1″ x 2″ lumber
• 1-1/4″ finish nails
• Wood glue
• Sandpaper
The first step is to cut the pieces for the frame. Cut the following pieces from 3/4″ plywood:
• 2 – 24″ x 12″ pieces
• 1 – 12″ x 10″ piece
Next, cut the following pieces from 1″ x 2″ lumber:
• 2 – 24″ pieces
• 1 – 12″ piece
Glue and nail the frame together using 1-1/4″ finish nails. Make sure the corners are square.
Now it’s time to cut the CD slots. I used a jigsaw to cut mine, but you could also use a circular saw or a band saw.
The slots are cut at a 45 degree angle and are 1-1/2″ wide x 3/4″ deep.
Sand all the pieces of the rack well, then apply a coat of wood glue to the frame and attach the CD slots. Clamp the rack together until the glue dries.
That’s it! You’ve just built a CD rack that will keep your CDs organized and accessible.
Woodworking Stool Plans
There are a few important things to know before starting any woodworking project. The first is to always use caution when using any type of power tool. The second is to make sure you have the proper tools and equipment for the project you are undertaking. The third is to always read and follow the manufacturer’s instructions for any power tool or equipment you are using.
With that out of the way, let’s get started on the woodworking stool plans. This is a simple project that can be completed in a few hours, using basic tools and equipment.
The first step is to cut the pieces for the stool. You will need two side pieces, a front and back piece, and a seat piece. The side pieces should be cut to the same length, and the front and back pieces should be cut to the same width. The seat piece should be cut to the same length as the side pieces, and the same width as the front and back pieces.
The next step is to drill the holes for the screws. The holes should be drilled in the front and back pieces, and the screws will hold the seat piece in place. The holes should be drilled in the middle of the width of the pieces, and should be the same distance apart.
The next step is to assemble the stool. The side pieces should be attached to the front and back pieces, using the screws. The seat piece should then be attached to the side pieces, using the screws.
The final step is to sand and finish the stool. The stool can be sanded using medium-grit sandpaper, and then finished with a coat of sealer, stain, or paint.
That’s it! You now have a completed woodworking stool.
Free Woodworking Plans Piano Bench
Looking for a piano bench that is both comfortable and stylish? Why not build your own? With a few simple woodworking plans, you can have a custom bench that is perfect for your needs.
The first step is to measure the bench you will be using. This will help you to determine the size of the bench you will need to build. You will also need to decide on the type of wood you want to use.
Once you have the measurements and the type of wood chosen, you can begin to build the bench. The first step is to cut the pieces of wood to the correct dimensions. Next, you will need to assemble the bench. This can be done by using nails or screws.
Finally, you will need to sand and stain or paint the bench. Be sure to follow the specific instructions for the type of wood you are using.
By following these simple steps, you can have a custom piano bench that is perfect for your needs.
Deacon Bench Woodworking Plans
A deacon bench is a type of wooden bench that has a back and two arms. It is often used as a church pew. Deacon benches can be made from a variety of different types of wood, including oak, pine, and maple.
There are many different plans for deacon benches available online. Some of the more popular plans include the following:
The Classic Deacon Bench Plan: This plan is for a deacon bench that is 67 inches long, 18 inches wide, and 33 inches high. It is made from oak, and the estimated cost of materials is $175.
The Deluxe Deacon Bench Plan: This plan is for a deacon bench that is 72 inches long, 23 inches wide, and 36 inches high. It is made from oak, and the estimated cost of materials is $225.
The Shaker-Style Deacon Bench Plan: This plan is for a deacon bench that is 48 inches long, 18 inches wide, and 36 inches high. It is made from maple, and the estimated cost of materials is $175.
The Mission-Style Deacon Bench Plan: This plan is for a deacon bench that is 60 inches long, 18 inches wide, and 36 inches high. It is made from oak, and the estimated cost of materials is $200.
Before beginning any of these plans, it is important to read through the entire set of instructions and to measure the space where the bench will be placed. It is also important to gather all of the materials and tools that will be needed before beginning the project.
The first step in any of the deacon bench plans is to cut the pieces of wood that will be used for the bench. The pieces should be cut to the correct dimensions, and the plans should be followed carefully.
The next step is to assemble the bench. This can be done using wood glue and nails or screws. The bench should be sturdy and should not wobble when it is sat on.
The final step is to finish the bench. This can be done with a variety of different types of wood finish, such as stain, sealer, or paint. The bench should be protected from the elements, and it should be kept in a dry place.
Deacon benches make beautiful and sturdy additions to any home. They can be used as benches in the entryway, as dining room benches, or as bedroom benches. They are also perfect for use in churches or other places of worship.
There are many different deacon bench plans available online. The best way to find the right plan for your needs is to do a search for “deacon bench plans” or “church pew plans.” There are many different plans to choose from, and the best one will be the one that fits the needs and the budget of the person who is building it.
Small Woodworking Project Plans
Small woodworking project plans are essential if you are a beginner woodworker. You need to start with small projects to get the hang of woodworking and how the tools work. Once you have some experience, you can move on to larger projects. Here are a few tips for finding small woodworking project plans:
– Look online. There are many websites that offer small woodworking project plans for free.
– Check out your local library. Many libraries have books with small woodworking project plans.
– Talk to a local woodworker. Many woodworkers are happy to share their plans with beginning woodworkers.
– Purchase a plan. There are many woodworking plans available for purchase.
When choosing a small woodworking project plan, make sure the project is achievable. Don’t choose a project that is too difficult for a beginner. Also, make sure the project is small enough that it can be completed in a short amount of time. A small woodworking project plan should not take more than a weekend to complete.
Hi everyone! I’m a woodworker and blogger, and this is my woodworking blog. In my blog, I share tips and tricks for woodworkers of all skill levels, as well as project ideas that you can try yourself.
